advertisement
Forums

The Forum is sponsored by 
 

AAPL stock: Click Here

You are currently viewing the Tips and Deals forum
Fix-it geeks: need help with Boston Acoustics Recepter radio
Posted by: enrico7300
Date: February 21, 2007 05:29PM
I got a Boston Acoustics Recepter radio...dual alarm, digital tuning, sweet looking tabletop radio, at the Goodwill for $15. Problem is, everything seems to be functional except for the sound output.

For you electronics tinkerers out there, what would be the first thing you would do? Pop it open and look for the speaker connections? Look for exploded capacitors? Put it on eBay?
Put the kettle on?

All advice is welcome...thanks,

Enrico
Options:  Reply • Quote
Re: Fix-it geeks: need help with Boston Acoustics Recepter radio
Posted by: Fritz
Date: February 21, 2007 05:41PM
speaker connections, but more likely speaker itself may have experienced explosive discomfort



!#$@@$#!

Quod suus via crustulum saxum

Options:  Reply • Quote
Re: Fix-it geeks: need help with Boston Acoustics Recepter radio
Posted by: Baby Tats
Date: February 21, 2007 05:54PM
Could be almost anywhere.

Well not anywhere, but anywhere in the amplification circuit. Crack it open and first check the speaker(s) for any damage or loose connections. Put a volt meter on the speaker outputs and see if you can measure anything when it is supposed to be playing.

If it isn't something physical like the speaker itself or connections, then the trouble probably lies within the amplification circuit. You can look around in there for any obvious signs of damaged or broken components. After that you are really going to need to start poking around with a multi meter to get any more useful info. I am guessing that is not an area you are looking to get into.



BT


Signed parental releases are on file for all tattooed minors.
Options:  Reply • Quote
Re: Fix-it geeks: need help with Boston Acoustics Recepter radio
Posted by: deckeda
Date: February 21, 2007 05:55PM
Pop it open. If you see something obvious, try replacing it. If you don't, your stuck w/o a schematic.
Options:  Reply • Quote
Re: Fix-it geeks: need help with Boston Acoustics Recepter radio
Posted by: Dick Moore
Date: February 21, 2007 06:01PM
If everything else works OK -- it tunes stations, the display shows stuff, lamps and/or LEDs light up, etc -- and there's no sound, then it might be an internal fuse it there are any. If it doesn't work at all, then it still might be an internal fuse or the power tranformer might have an open winding, or any of several tens of other things....



What it is, man, a low-down and funky feelin'
Options:  Reply • Quote
radio
Posted by: enrico7300
Date: February 21, 2007 06:28PM
Well, I have a hammer...

Seriously, I don't have delusions about what I can do, but I do have a soldering iron, multimeter, and the interwebs. Who knows what will happen next?

-----------------------

It will probably go something like this:

Ned Nederlander: ...Now, what is it that this town really does well?
Townspeople: Hmmm. Hmmm? Ummm. [long pause]
Mama Sanchez: We can sew!
Dusty Bottoms: There you go, you can sew.
Ned Nederlander: Ah.
Dusty Bottoms: If only we had known this sooner.
Options:  Reply • Quote
Re: Fix-it geeks: need help with Boston Acoustics Recepter radio
Posted by: The Grim Ninja
Date: February 21, 2007 08:44PM
Plug in headphones.

That should bypass most amplification circuitry.
Options:  Reply • Quote
unfortunately
Posted by: enrico7300
Date: February 21, 2007 09:20PM
unfortunately there is no headphone jack, just an aux jack.
Options:  Reply • Quote
Re: Fix-it geeks: need help with Boston Acoustics Recepter radio
Posted by: Dick Moore
Date: February 21, 2007 10:58PM
And headphones generally run off od a low-voltage sample of the speaker outputs, so that wouldn't help.....



What it is, man, a low-down and funky feelin'
Options:  Reply • Quote
Lots of boiling water, and tear clean sheets into strips.
Posted by: RAMd®d
Date: February 22, 2007 12:15AM
Is there *any* kind of noise from the speaker?

If there is any hiss, then the AUX jack could be jacked up.

Otherwise it's something in the amp circuit or the speaker. Yes, check it's connections.

Drop a line to BA about this and see if they'd consider refurbishing it.






I am that Masked Man.

All you can do, is all you can do.

There’s trouble — it's time to play the sound of my people.

Your boos mean nothing to me, I've seen what you cheer for.

Insisting on your rights without acknowledging your responsibilities isn’t freedom, it’s adolescence.

I've been to the edge of the map, and there be monsters.

We are a government of laws, not men.

Everybody counts or nobody counts.

When a good man is hurt,
all who would be called good
must suffer with him.

You and I have memories longer than the road that stretches out ahead.

There is no safety for honest men except
by believing all possible evil of evil men.

We don’t do focus groups. They just ensure that you don’t offend anyone, and produce bland inoffensive products. —Sir Jonathan Ive

An armed society is a polite society.
And hope is a lousy defense.

You make me pull, I'll put you down.

I *love* SIGs. It's Glocks I hate.
Options:  Reply • Quote
no noise from speaker
Posted by: enrico7300
Date: February 22, 2007 01:10PM
the display, mode switch, alarm settings, all work. But there is no sound at all.
Options:  Reply • Quote
Sorry, only registered users may post in this forum.

Click here to login

Online Users

kj , Smote
Guests: 603
Record Number of Users: 186 on February 20, 2020
Record Number of Guests: 5122 on October 03, 2020