advertisement
Forums

The Forum is sponsored by 
 

AAPL stock: Click Here

You are currently viewing the Tips and Deals forum
Why do my French press guts always break?
Posted by: RecipeForDisaster
Date: October 09, 2021 05:36AM
I’ve been using small, approximately 8oz, French presses for maybe 30 years. I treat them well… our water is softened… I rinse after using and use to make one cup each day. I’ve had some pretty nice ones over the years - currently I have a gorgeous rainbow treated stainless steel one. It seems to be good quality.

Without fail, the welds at the end of the rod fail "prematurely". The steel one lasted about 6 months. The company did replace it - but I’m dying to know why this happens and if it can be fixed. I have several rod/press assemblies. Sometimes the area seems to be threaded, but you can’t screw the nut back on. It might be stripped, but that seems odd.

There’s never a dramatic break - you go to use it one day and surprise, the press doesn’t press anymore. The bottom is loose and dangly.

Anything I can do to avoid this problem or maybe have some of these fixed?
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: Speedy
Date: October 09, 2021 05:42AM




Saint Cloud, Minnesota, where the weather is wonderful even when it isn't.
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: RecipeForDisaster
Date: October 09, 2021 05:51AM
Quote
Speedy

Yeah… I would like it if that were the problem, haha!

I am pretty gentle - if you don’t press evenly and slowly, you can have an explosion anyway. But if you saw me, you would not say I have those guns! It also never breaks "in use", it’s always like "hey good morning I don’t work anymore".
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: MrNoBody
Date: October 09, 2021 07:01AM
any of these in your fail list?

Amazon: Best Sellers in Coffee Presses

The 12oz Bodum 10948-01BUS is ranked #4 and is only $16.
[www.amazon.com]
4.5 Stars with 9,414 ratings



39°36'17"N 75°44'43"W

DuckDuckGo
The search engine that doesn't track you.

DemComm Records 2021 Greatest Hits
includes:
Taxman by Joe & Nancy's Rich Ice Cream Band
The Humpty Dance by The Harris-Brown Hookup
Lets Spend The Night Together by The Fang-Swalwell Gang
Díaz-Canel Is A Friend of Ours by The AOC Squad
My Old Kentucky Retirement Home by MitchMcC & The Soggy Boxer Boys
Burning Down The House by Merrick & The Goons
Back In the USSR by Bernie's Red Square Trio

patriot smiley
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: DP
Date: October 09, 2021 07:01AM
Why use a French press? How about the one cup basket type-heat water and pour in the basket that fits your coffee cup, especially for just one cup.

A thing about French presses is the "mud" produced which is the reason I don't use one.






Disclaimer: This post is checked for correct spelling, punctuation, and grammar. Any attempts at humor are solely the responsibility of the author and bear no claim that any and all readers will approve or appreciate said attempt at humor.
My name is DP, and I approve this message.

"Show me the man and I’ll show you the crime."- Lavrentiy Beria
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: RecipeForDisaster
Date: October 09, 2021 07:04AM
I’ve tried everything, and I just love the strength and crema from the French press. I don’t mind the mess.. so used to it, and I use the grounds in the garden.

Yes, I’ve had Bodums fail. I like the small ones.
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: Fritz
Date: October 09, 2021 07:44AM
steel.
[smile.amazon.com]
I bought the coffee gator one and it has been fine for a few years.
But a slow light touch is important.
The only weak link in mine is the top isn't fully sealed. So I used the plastic top from a previous (cheap glass) Bodum.
If I were to buy again, I'd get the Mueller coz the top appears to be fully sealed.
I'd bet they all come out of the same Chicom sweat shop.



!#$@@$#!

Nolite manducare flavo.

Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: NewtonMP2100
Date: October 09, 2021 09:23AM
.....the French are all style.....but no substance.......???



_____________________________________

I reject your reality and substitute my own!
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: MikeF
Date: October 09, 2021 11:11AM
Learn how to re-weld them?
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: Wags
Date: October 09, 2021 11:12AM
I've been using the same Aeropress daily for at least 20 years. No welds, all strong plastic and rubber. I replaced the rubber end once from their website.
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: cbelt3
Date: October 09, 2021 11:17AM
Quote
MikeF
Learn how to re-weld them?
Very small TIG required, or spot weld jig. Not easy and the equipment is expensive.
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: Rolando
Date: October 09, 2021 12:35PM
I use a cheap Frensh Press from Ikea. Glass pot, metal filters, comes apart for washing.

I broke one when I dropped it in my ceramic covered iron sink. Bought another.
[www.ikea.com]

EDIT: I re-read your post. Maybe its metal fatigue? Are you pouring boiling water in cold press? Are you rinsing a hot press with cold water? That COULD POSSIBLY cause the welds too fail...



San Antonio, TX (in the old city)


"All that is required for evil to prevail is for good men to do nothing." - Edmund Burke
“Neutrality helps the oppressor, never the victim. Silence encourages the tormentor, never the tormented." - Eli Weisel

"To announce that there must be no criticism of the President, or that we are to stand by the President, right or wrong, is not only unpatriotic and servile, but is morally treasonable to the American public." - Theodore Roosevelt (1918)

"I don’t want to see religious bigotry in any form. It would disturb me if there was a wedding between the religious fundamentalists and the political right. The hard right has no interest in religion except to manipulate it." - Billy Graham 1981

"Politics and governing demand compromise. But these Christians believe they are acting in the name of God, so they can't and won't compromise" - Barry Goldwater



Edited 1 time(s). Last edit at 10/09/2021 12:38PM by Rolando.
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: MrNoBody
Date: October 09, 2021 01:41PM
Just had a thought (dangerous); maybe it's the small size of the 8oz press.
Thinner, weaker components perhaps?
Consider a larger size press & just make a single cup.



39°36'17"N 75°44'43"W

DuckDuckGo
The search engine that doesn't track you.

DemComm Records 2021 Greatest Hits
includes:
Taxman by Joe & Nancy's Rich Ice Cream Band
The Humpty Dance by The Harris-Brown Hookup
Lets Spend The Night Together by The Fang-Swalwell Gang
Díaz-Canel Is A Friend of Ours by The AOC Squad
My Old Kentucky Retirement Home by MitchMcC & The Soggy Boxer Boys
Burning Down The House by Merrick & The Goons
Back In the USSR by Bernie's Red Square Trio

patriot smiley
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: RecipeForDisaster
Date: October 09, 2021 02:46PM
Larger presses make worse coffee, IMO, if you only make a little. The proportion seems off and the press doesn’t want to go down low enough for the small volume of coffee. I did that for many years until I got a small one. I’m very gentle/even/level/slow with my press technique.

I don’t want plastic, which is why I don’t go with an Aeropress. I also don’t want to get into disposable filters.

The latest one that broke was a good steel one. Sigh.

Metal fatigue is possible - it’s room temp when hot water goes in, but I don’t rinse until it’s cooled down (because I’m drinking the coffee). I would hope it’d tolerate going from room temperature to hot water…
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: N-OS X-tasy!
Date: October 09, 2021 10:54PM
I bought the 36-oz. version of this one eight years ago at Home Goods for less than half of what Amazon sells it for today — never had a bit of trouble with it (prolly cuz it’s built like a tank):

[www.amazon.com]



It is what it is.
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: RecipeForDisaster
Date: October 10, 2021 04:05AM
Looks nice - that’s why I bought the steel one I did this year. I think it lasted less than any other I’ve had, unfortunately. It feels like it’s built extremely well… got and finish are super. At least I don’t think the carafe will break. The company did replace it, but I want the new one to survive!
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: N-OS X-tasy!
Date: October 10, 2021 05:12AM
Quote
RecipeForDisaster
Looks nice - that’s why I bought the steel one I did this year. I think it lasted less than any other I’ve had, unfortunately. It feels like it’s built extremely well… got and finish are super. At least I don’t think the carafe will break. The company did replace it, but I want the new one to survive!

I see in your OP that your welds failed - the unit I bought has no welds. Everything screws/bolts on and is user-replaceable, if needed. Like I said, it's built like a tank - I can't imagine it ever failing.

I can't get over how much it costs on Amazon - I only paid $50 bucks for mine.

EDIT: I took a closer look at this while making coffee this morning. It does have one weld — the handle is welded to the body. Everything else uses threaded fasteners.



It is what it is.



Edited 1 time(s). Last edit at 10/10/2021 08:08PM by N-OS X-tasy!.
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: RecipeForDisaster
Date: October 10, 2021 04:54PM
This one seems to have gotten its nut stripped (? How) rather than a weld going. It’s this one - I could never imagine it breaking either. [www.amazon.com]é-French-Press-Coffee-Maker/dp/B07NWCVS2C
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: MrNoBody
Date: October 11, 2021 12:18PM
I got a 1L SterlingPro French Press Coffee Maker six years ago from Amz
for $10 (crazy promo sale) [www.amazon.com]

Built like a tank. No issues but then again it's not a daily driver.





39°36'17"N 75°44'43"W

DuckDuckGo
The search engine that doesn't track you.

DemComm Records 2021 Greatest Hits
includes:
Taxman by Joe & Nancy's Rich Ice Cream Band
The Humpty Dance by The Harris-Brown Hookup
Lets Spend The Night Together by The Fang-Swalwell Gang
Díaz-Canel Is A Friend of Ours by The AOC Squad
My Old Kentucky Retirement Home by MitchMcC & The Soggy Boxer Boys
Burning Down The House by Merrick & The Goons
Back In the USSR by Bernie's Red Square Trio

patriot smiley
Options:  Reply • Quote
Re: Why do my French press guts always break?
Posted by: RecipeForDisaster
Date: October 11, 2021 12:36PM
I actually think the steel one I got has replaceable parts - it may be stripped and not the weld that is the issue. I don’t know how to find a replacement strange nut/rod, though(and I can’t tell where the issue is - the nut or the rod). When I wrote to the company, they just replaced the whole press.

In any case, many of the presses I have spent good money on were higher end and still have not lasted. I do I use it daily. This one is a double wall steel one… which is why I’m asking for help. Getting nicer ones has not helped my issue. I was very surprised that this happened but I’ve said that before - This is not the first good one I’ve bought.
Options:  Reply • Quote
Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 590
Record Number of Users: 186 on February 20, 2020
Record Number of Guests: 5122 on October 03, 2020