advertisement
Forums

The Forum is sponsored by 
 

AAPL stock: Click Here

You are currently viewing the Tips and Deals forum
Lunaz Answers Demand For Electric Classic Cars
Posted by: Fritz
Date: February 18, 2022 05:05PM
[sportscardigest.com]

[lunaz.design]



!#$@@$#!

Quod suus via crustulum saxum





Edited 2 time(s). Last edit at 02/18/2022 05:17PM by Fritz.
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: N-OS X-tasy!
Date: February 18, 2022 05:17PM
One wonders how well these older cars adapt to the unique stresses that result from the EV conversion -- specifically, to the additional load on the vehicle frame and suspension due to the EV battery. One assumes the converter must augment the load-bearing capacity of these system as part of the conversion (although maybe not so much augmentation is required for the frame on these old Detroit steel roadsters).

Lots of other things to take into consideration, too, like the change in the vehicle's center of gravity and the change in handling, for instance. It would be interesting to see the engineering that goes into this type of conversion.



It is what it is.
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: Fritz
Date: February 18, 2022 05:25PM
there is a TV show around a Welsh company doing the same thing on a smaller scale.
[www.vintagevoltage.tv]



!#$@@$#!

Quod suus via crustulum saxum

Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: Carnos Jax
Date: February 18, 2022 05:47PM
This is definitely nice. Think there would be a decent boutique market for stuff like this.
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: MikeF
Date: February 18, 2022 06:32PM
Electric Pinto
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: Racer X
Date: February 18, 2022 07:55PM
There is a startup that is selling a controller, and 4 125hp ring motors that will fit inside the "envelope" of a wheel. $10k a set. Just need some custom software(they will work with you) and some cheap Prius battery packs, and 4WD 500 horses at the pavement.

Put that in a lightened Dodge Dart or a first gen Camaro/Firebird or an early Mustang. Stick a battery pack or 2 under the hood, and 2 in the back trunk/gas tank area. Keep the weight low and over the wheel areas.



********************************************
“A sword never kills anybody; it is a tool in the killer's hand.” Seneca the Younger

The police have no duty to respond. See Castle Rock v. Gonzales, 545 U.S. 748 (2005) or Warren v. District of Columbia[1] (444 A.2d. 1, D.C. Ct. of Ap. 1981)

Judge Lee wrote that “we cannot jettison our constitutional rights, even if the goal behind a law is laudable." 9th Circuit Court of Appeals

[www.youtube.com]
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: Rolando
Date: February 18, 2022 09:02PM
Quote
Racer X
There is a startup that is selling a controller, and 4 125hp ring motors that will fit inside the "envelope" of a wheel. $10k a set. Just need some custom software(they will work with you) and some cheap Prius battery packs, and 4WD 500 horses at the pavement.

Put that in a lightened Dodge Dart or a first gen Camaro/Firebird or an early Mustang. Stick a battery pack or 2 under the hood, and 2 in the back trunk/gas tank area. Keep the weight low and over the wheel areas.

If they fit, in the transmission tunnel as well!



San Antonio, TX (in the old city)


"All that is required for evil to prevail is for good men to do nothing." - Edmund Burke
“Neutrality helps the oppressor, never the victim. Silence encourages the tormentor, never the tormented." - Eli Weisel

"To announce that there must be no criticism of the President, or that we are to stand by the President, right or wrong, is not only unpatriotic and servile, but is morally treasonable to the American public." - Theodore Roosevelt (1918)

"I don’t want to see religious bigotry in any form. It would disturb me if there was a wedding between the religious fundamentalists and the political right. The hard right has no interest in religion except to manipulate it." - Billy Graham 1981

"Politics and governing demand compromise. But these Christians believe they are acting in the name of God, so they can't and won't compromise" - Barry Goldwater
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: mrbigstuff
Date: February 19, 2022 12:08AM
Quote
Racer X
There is a startup that is selling a controller, and 4 125hp ring motors that will fit inside the "envelope" of a wheel. $10k a set. Just need some custom software(they will work with you) and some cheap Prius battery packs, and 4WD 500 horses at the pavement.

Put that in a lightened Dodge Dart or a first gen Camaro/Firebird or an early Mustang. Stick a battery pack or 2 under the hood, and 2 in the back trunk/gas tank area. Keep the weight low and over the wheel areas.

Really? I've been saying for years now that wheel-mounted motors would be the way of the future of EVs, so much control available.



High on a threshold yearning to sing
Down with the dancers having one last fling
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: GeneH
Date: February 19, 2022 12:29AM
mrbigstuff,

The problem with that approach is you're messing with the sprung vs. unsprung weight ratio. To get a softer, more comfortable, more controllable ride, you need a greater sprung weight vs. unsprung. The objective is to reduce unsprung weight.

Which is why on "super race" cars, they even move the braking assemblies inboard alongside and next to the differential with only the axle shafts and hubs/spindles going out to the wheels. Your brake assembly
is no longer "outboard" with the wheels.

Or so I read somewhere ages ago. Anyone heard or read anything different?
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: GeneH
Date: February 19, 2022 12:30AM
mrbigstuff,

The problem with that approach is you're messing with the sprung vs. unsprung weight ratio. To get a softer, more comfortable,more controllable ride, you need a greater sprung weight vs. unsprung.

Which is why on "super race" cars, they even move the braking assemblies inboard alongside and next to the differential with only the axle shafts and hubs/spindles going out to the wheels. Your brake assembly
is no longer "outboard" with the wheels.
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: Racer X
Date: February 19, 2022 12:43AM
sure, but I am talking about old-school styling with a modern drive components retrofit.

[in-wheel.com]

I don't think this is the one I read about a while back. But some info nevertheless.



********************************************
“A sword never kills anybody; it is a tool in the killer's hand.” Seneca the Younger

The police have no duty to respond. See Castle Rock v. Gonzales, 545 U.S. 748 (2005) or Warren v. District of Columbia[1] (444 A.2d. 1, D.C. Ct. of Ap. 1981)

Judge Lee wrote that “we cannot jettison our constitutional rights, even if the goal behind a law is laudable." 9th Circuit Court of Appeals

[www.youtube.com]
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: Markintosh
Date: February 19, 2022 08:40AM
I think I have said it before...but a conversion of my first generation Tacoma to EV with 4WD would be amazing, even if the range was only a 150 miles or so.



“Live your life, love your life, don’t regret…live, learn and move forward positively.” – CR Johnson
Loving life in Lake Tahoe, CA
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: mrbigstuff
Date: February 19, 2022 04:35PM
Quote
GeneH
mrbigstuff,

The problem with that approach is you're messing with the sprung vs. unsprung weight ratio. To get a softer, more comfortable, more controllable ride, you need a greater sprung weight vs. unsprung. The objective is to reduce unsprung weight.

Which is why on "super race" cars, they even move the braking assemblies inboard alongside and next to the differential with only the axle shafts and hubs/spindles going out to the wheels. Your brake assembly
is no longer "outboard" with the wheels.

Or so I read somewhere ages ago. Anyone heard or read anything different?

I think the setups I've read about are combinations of spindle, brake and bearing and electric motor all in one. So, I'd agree with you if we are talking about a car we know it today, but things will (maybe) radically shift in the coming years.



High on a threshold yearning to sing
Down with the dancers having one last fling
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: Cary
Date: February 19, 2022 10:23PM
Quote
mrbigstuff
Quote
GeneH
mrbigstuff,

The problem with that approach is you're messing with the sprung vs. unsprung weight ratio. To get a softer, more comfortable, more controllable ride, you need a greater sprung weight vs. unsprung. The objective is to reduce unsprung weight.

Which is why on "super race" cars, they even move the braking assemblies inboard alongside and next to the differential with only the axle shafts and hubs/spindles going out to the wheels. Your brake assembly
is no longer "outboard" with the wheels.

Or so I read somewhere ages ago. Anyone heard or read anything different?

I think the setups I've read about are combinations of spindle, brake and bearing and electric motor all in one. So, I'd agree with you if we are talking about a car we know it today, but things will (maybe) radically shift in the coming years.

It really doesn't matter - putting more weight in the wheel assemblies leads to worse handling and ride.
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: Racer X
Date: February 20, 2022 02:09AM
Quote
Cary
Quote
mrbigstuff
Quote
GeneH
mrbigstuff,

The problem with that approach is you're messing with the sprung vs. unsprung weight ratio. To get a softer, more comfortable, more controllable ride, you need a greater sprung weight vs. unsprung. The objective is to reduce unsprung weight.

Which is why on "super race" cars, they even move the braking assemblies inboard alongside and next to the differential with only the axle shafts and hubs/spindles going out to the wheels. Your brake assembly
is no longer "outboard" with the wheels.

Or so I read somewhere ages ago. Anyone heard or read anything different?

I think the setups I've read about are combinations of spindle, brake and bearing and electric motor all in one. So, I'd agree with you if we are talking about a car we know it today, but things will (maybe) radically shift in the coming years.

It really doesn't matter - putting more weight in the wheel assemblies leads to worse handling and ride.

You can mitigate that a fair bit by making changes to a number of components. You can drop 20+ pounds a corner with aluminum rims and brake drums, for example. And downsize brake size with regenerative braking. The brakes on my Prius are tiny relative to vehicle weight.



********************************************
“A sword never kills anybody; it is a tool in the killer's hand.” Seneca the Younger

The police have no duty to respond. See Castle Rock v. Gonzales, 545 U.S. 748 (2005) or Warren v. District of Columbia[1] (444 A.2d. 1, D.C. Ct. of Ap. 1981)

Judge Lee wrote that “we cannot jettison our constitutional rights, even if the goal behind a law is laudable." 9th Circuit Court of Appeals

[www.youtube.com]
Options:  Reply • Quote
Re: Lunaz Answers Demand For Electric Classic Cars
Posted by: mrbigstuff
Date: February 20, 2022 10:44AM
Quote
Racer X
Quote
Cary
Quote
mrbigstuff
Quote
GeneH
mrbigstuff,

The problem with that approach is you're messing with the sprung vs. unsprung weight ratio. To get a softer, more comfortable, more controllable ride, you need a greater sprung weight vs. unsprung. The objective is to reduce unsprung weight.

Which is why on "super race" cars, they even move the braking assemblies inboard alongside and next to the differential with only the axle shafts and hubs/spindles going out to the wheels. Your brake assembly
is no longer "outboard" with the wheels.

Or so I read somewhere ages ago. Anyone heard or read anything different?

I think the setups I've read about are combinations of spindle, brake and bearing and electric motor all in one. So, I'd agree with you if we are talking about a car we know it today, but things will (maybe) radically shift in the coming years.

It really doesn't matter - putting more weight in the wheel assemblies leads to worse handling and ride.

You can mitigate that a fair bit by making changes to a number of components. You can drop 20+ pounds a corner with aluminum rims and brake drums, for example. And downsize brake size with regenerative braking. The brakes on my Prius are tiny relative to vehicle weight.

Right, the whole assembly is going to look much different on future cars. For example, there may be no need for rotors and calipers and axles. Think of howmuch weight that would save.



High on a threshold yearning to sing
Down with the dancers having one last fling



Edited 1 time(s). Last edit at 02/20/2022 10:46AM by mrbigstuff.
Options:  Reply • Quote
Sorry, only registered users may post in this forum.

Click here to login

Online Users

Guests: 578
Record Number of Users: 186 on February 20, 2020
Record Number of Guests: 5122 on October 03, 2020