I'm at 10.6.2 and the driver (on included CD) supplied with the card was all I needed. I did some web checking before I bought it and the consensus was it was as good as any and better than most. Here's what shows up in system profile under PCI Cards:
ExpressCard:
Type: Other Mass Storage Controller
Driver Installed: Yes
Bus: PCI
Slot: PCI Slot 3
Vendor ID: 0x1095
Device ID: 0x3132
Subsystem Vendor ID: 0x1095
Subsystem ID: 0x3132
Revision ID: 0x0001
Link Width: x1
Link Speed: 2.5 GT/s
The external drive appears under the Parallel SCSI Device Tree
Capacity: 500.11 GB (500,107,862,016 bytes)
Manufacturer: WDC WD50
Model: 00AAKS-00TMA0
Revision: 12.0
Removable Media: Yes
Detachable Drive: No
BSD Name: disk1
SCSI Logical Unit Identifier: 0
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Not Supported
Volumes:
465GB:
Capacity: 499.76 GB (499,763,888,128 bytes)
Available: 409.28 GB (409,275,289,600 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /Volumes/465GB
Edited to correct drive info.
Edited 2 time(s). Last edit at 11/26/2009 01:09AM by olnacl.